I/o configuration by channel, Chart configuration – Measurement Computing DataShuttle User Manual
Page 92
10-4 QuickLog Introduction
11-12-01
DataShuttle and DynaRes
I/O Configuration By Channel
The input and/or output of each channel can be configured using these options:
• Device (board)
• Channel
• Range (AI and AO only)
• Resolution (AI only)
• Scale (AI only): y = mx + b where m and b may be entered.
• Logging: yes/no.
• Display on chart: yes/no.
Chart Configuration
Charts can be configured according to these available settings:
• Number of points on time axis (2 to 1000)
• Number of labels on time axis
• % of full scale on Y axis (0 to 100)
• Scaling of Y axis: -1e10 to 1e10
• Selectable options:
Color for each trace
Line type for each trace
Chart Colors
• Viewing Style: Color, monochrome, monochrome + symbols
• Plotting method: Line, Point, Points + Line, Points + Spline, Spline
• Graph or Table: Graph, Table, Both
• Grid Lines: Both, Y axis, X axis, None
• Grid in front
• UnZoom
• Font size: Large, Medium, Small