Chapter 5 - dynares - tecnical notes, Overview, Pin assignments – Measurement Computing DataShuttle User Manual

Page 47

DataShuttle and DynaRes

11-13-01

DynaRes - Technical Notes 5-1

DynaRes - Technical Notes

Overview

Although operations in this chapter are seldom necessary during everyday data acquisition, you might want
to refer to them at certain times during operation of the DynaRes. They are

• Pinouts (at the board’s connectors in the event you want to connect analog or digital signals directly,

without using a terminal panel; refer to pages 5 – 1);

• Block diagram of the DynaRes showing on-board processing (see page 5 –2);

• Recalibration of all DynaRes on-board references to bring the accuracy of the product to factory

specifications (see page 5 – 3);

• Using EDITCAL to edit calibration files on EEPROM to accommodate changes to your installation,

or to restore missing files (on page 5 –3);

• Note for DOS users with respect to the Analog Connection Development System

(see page 5 – 4);

• Troubleshooting: some possible problems and solutions after installing, and during operation of the

DynaRes (starting on page 5 – 4).

Pin Assignments

Pinouts of the DynaRes 8 and Channels 1-8 on the DynaRes 16

(at Back Panel Connector)

This manual is related to the following products:

DynaRes