Connecting carchip pro to a computer – DAVIS CarChip Online Help (8221, 8226, 8245, 8246) User Manual
Page 9
Welcome to CarChip
4.
Check to make sure the data logger indicator light is blinking. This verifies CarChip was properly
inserted into the OBDII port and is communicating with your vehicle.
Back to Home | CarChip Installation
Home | File | Setup | CarChip | Tools | View | Help | Shortcuts
Connecting CarChip Pro to a Computer
The CarChip Pro or CarChip Fleet Pro data logger (# 8226, 8246) connects to your computer using a USB
connection.
To connect the CarChip Pro data logger to your computer using a USB connector:
1. Insert the USB connector of the download cable into a USB port.
2. Plug the smaller connector into the CarChip Pro (# 8226) or CarChip Fleet Pro (# 8246) data logger
port.
See Connecting an Older Model CarChip to a computer if using a different model of the CarChip than the
one shown.
5