DAVIS CarChip Online Help (8221, 8226, 8245, 8246) - Manual (Page 59)

Welcome to CarChip
1. Select Set Braking Thresholds from the CarChip menu. The CarChip / Set Braking Thresholds dialog
box displays.
2. Enter your desired hard and extreme braking thresholds or click Default to use the software default
threshold settings. The default braking thresholds are: 0.35 and 0.50 G (US & Metric) and 3.4 and
4.9 m/s
2 (S.I.).
3. Click OK to save the new settings. Click Cancel to exit the dialog box and retain the previous
settings.
Note: The extreme braking threshold is also the threshold that triggers the audible alarm on the CarChip
Pro, CarChip Fleet Pro, CarChip E/X with Alarm, and CarChip Fleet with Alarm models. When this braking
threshold is exceeded in a vehicle, the alarm sounds five times. See Enable CarChip Alarm for more
information on using the CarChip Alarm feature.
See Also:
Hard Braking Threshold
Extreme Braking Threshold
Back to Walkthrough - Full Setup | CarChip Menu
Home | File | Setup | CarChip | Tools | View | Help | Shortcuts
Hard Braking Threshold
The Hard Braking Threshold box in the Set Braking Thresholds dialog box is the lower of two braking
thresholds in the CarChip Software.
The default hard braking threshold for each standard measurement system is:
• 0.35 G - For U.S. measurement system.
•
0.35 G - For Metric measurement system.
• 3.4 m/s 2 - For S.I. measurement system.
See Also:
Extreme Braking Threshold
Back to Set Braking Thresholds
Home | File | Setup | CarChip | Tools | View | Help | Shortcuts
55