DAVIS CarChip Online Help (8221, 8226, 8245, 8246) - Manual (Page 107)

Welcome to CarChip
Note: The CarChip data logger does not have to maintain a constant connection with your computer. The
CarChip can be connected and disconnected at any time the CarChip software is not downloading
information from the CarChip data logger.
To connect the CarChip data logger to your computer using a USB connector:
1. Locate a free USB port on the front or back of your computer and insert the USB connector of the
download cable into the USB port.
2. Plug the microminiature connector into the port on the CarChip data logger.
To connect the CarChip data logger to your computer using a serial port:
ns for connecting earlier versions of the CarChip (products # 8210, # 8220) to a
erial port on the back of your computer and insert the 9-pin connector of the
e port.
2. Plug the power adapter cable into the power jack on the 9-pin connector.
wer supply into an AC outlet.
iniature connector into the port on the CarChip data logger.
The following instructio
serial port connection:
1. Locate a free s
download cable into th
3. Plug the po
4. Plug the 8-pin microm
103