DAVIS CarChip Online Help (8221, 8226, 8245, 8246) - Manual (Page 34)

CarChip Online Help Printable Version
2. Select one of the listed ports or enter the name of the desired port.
Select USB if the CarChip is connected to a USB port. Select one of the available COM ports if the
CarChip is connected to a Serial or COM port, or type in the name of the COM port if it is not on the
available list.
3. Click OK to save the new port selection, or click Cancel to exit the dialog box and retain the previous
port selection.
Back to Setup Menu
Home | File | Setup | CarChip | Tools | View | Help | Shortcuts
Plots
Plots
Use the Plots dialog box to configure your Trip View and Accident View plot options.
To configure the plot display options:
1. Select Plots from the Setup menu, select this option during the Walkthrough Setup process, or click
the Options button when a Trip Log view or Accident Log view is displayed. The Setup / Plots dialog
box displays.
2. Check the box next to each plot option to turn it on. A checked box indicates the option is turned on.
De-select a box to turn a plot option off. Multiple options can be turned on or off at a time. The plot
options are:
30