DAVIS CarChip Online Help (8221, 8226, 8245, 8246) - Manual (Page 51)

Welcome to CarChip
memory is never cleared after download. To change your CarChip memory clearing options, see Clear
Memory.
See Also:
Setup / Miscellaneous
Back to Home
Home | File | Setup | CarChip | Tools | View | Help | Shortcuts
CarChip Menu Commands
CarChip Menu Commands
The CarChip menu commands control operations affecting the CarChip data logger.
Note: The data logger must be connected to your computer to access any of these commands.
The commands that display in this menu depend on the CarChip data logger model. The CarChip menu
commands are:
Download CarChip Data - Lets you download data from the CarChip data logger to your computer.
Display CarChip Memory - Displays the available memory available on your CarChip data logger.
Clear CarChip Memory - Lets you clear the CarChip memory.
Enable CarChip LED - Controls the modes of operation for your CarChip LED.
Reset Check Engine Light - Configures your CarChip to turn off the Check Engine Light in your vehicle.
Enable CarChip Alarm - Controls the modes of operation for your CarChip Alarm.
Note: This command is only available for the CarChip Pro (# 8226), CarChip Fleet Pro (# 8246), and
CarChip E/X Alarm (product 8225), and CarChip Fleet with Alarm (# 8245) model.
Enable CarChip VIN Mode - Configures your CarChip to retrieve vehicle's unique VIN number when it is
connected to a car.
Note: This command is only available for CarChip models 8211, 8221, 8225, 8226, 8241, 8245, and 8246.
Set Anomalous Vehicle - Lets you configure your CarChip data logger to meet any unique specifications
present on the ODBII port of your vehicle.
Set Speed Bands - Lets you set speed thresholds so you can monitor your speed.
Set Braking Thresholds - Lets you configure the deceleration rates that determine hard and extreme
breaking in your vehicle.
Set Acceleration Thresholds - Lets you configure the acceleration rates that determine hard and extreme
acceleration in your vehicle.
Set Clock - Lets you set the CarChip data logger's internal clock to your computer's clock.
Choose Other Parameters - Lets you configure parameters regarding your
Back to Home
47