Gasboy TopKAT PLUS - Manual (Page 18)

Introduction Available Configurations
Page 1-12 MDE-5013C TopKAT™ PLUS Installation Manual · February 2015
Available Configurations
General
TopKAT PLUS is available in several configurations, in accordance with its intended use and
with the components installed. All configurations are manufactured in accordance with
specific customer request and receive a part number (refer to
“Configurations” ). Following
paragraphs describe the several configurations and their device composition:
Optional Printer
The printer in the TopKAT PLUS is provided as an option. The printer issues a printout of the
transaction to the driver.
Dispensers
TopKAT PLUS can support either mechanical or electronic dispensers, in accordance with its
configuration.
Mechanical dispensers require the installation of an MPIC card on the 8-port CommVerter.
Electronic dispensers require installation of an interface card (RS-485) on the 8-port
CommVerter.
Configurations
Following table defines all the available product numbers for the different TopKAT PLUS
configurations:
Part Number Name Dispenser
PR
N
E
lect
ro
nic
M
ech
anic 2
P
rinter
PA040500000 TopKAT PLUS (E) + - -
PA040501000 TopKAT PLUS (2M) - + -
PA040500010 TopKAT PLUS (E, PRN)* + - +
PA040501010 TopKAT PLUS (2M, PRN)* - + +
*TopKAT PLUS with printer is for installation over class 1, division 2.
Note: TopKAT PLUS does not support Tank Level Gauges (TLG) or additional electronic
dispensers. Those devices require an external box or another solution.
In the order form, customers are required to define the part number for the specific pump card
in use (MPI-C or RS-485, refer to the following table).
No. Pump Card Description Gilbarco ® Part Number
1 RS-485 Interface (8P) P.B. M09680B014
2 MPI-C + Sub Interface (8P) P.B. M09680B105