Outdoor printer (optional), Port commverter – Gasboy TopKAT PLUS User Manual
Page 12
Introduction
TopKAT PLUS Structure
Page 1-6
MDE-5013C TopKAT™ PLUS Installation Manual · February 2015
Outdoor Printer (Optional)
TopKAT PLUS includes an optional printer for receipts printout, as well as data output. The
printer is linked to the central payment terminal that sends to it the transaction data for
printout.
Printer module G2 is a compact, ruggedized thermal printer suitable for the harsh environment
of the gas station. It includes two sensors for paper usage alerts:
• Low paper sensor - activated when there is approximately 25% of the paper roll left
• End paper sensor - activated when printer paper runs out completely
The paper usage and receipt indications include a buzzer sound, Light Emitting Diode (LED)
indicators or the combination of both, dependent on its configuration.
Figure 1-5: Outdoor Printer (Optional)
8-port CommVerter
The 8-port CommVerter consists of a communication board for all TopKAT PLUS electronic
units and for the peripheral equipment interface.
The CommVerter includes an Ethernet switch, RS-485 port for electronic pumps or an
Mechanical Pump Interface Card (MPI-C) for interface to a mechanical pump. For more
information, refer to
. The CommVerter communicates with the site
controller (OrCU) through a LAN (Ethernet) link.