Gasboy TopKAT Online Operation Manual - Manual (Page 56)

Appendix A: Prompts at the Hertz Online TopKAT Totalizer Sequence (Online Mode)
Page A-8 MDE-4589 PC TopKAT™ Online Operation and Setup Manual · August 2010
Offline Scenario 3
If the Driver # was entered but no Driver Record was received, accept the entered Driver #.
These files are structured as carat delimited flat files.
“ENTER PUMP #:”
The remainder of the sequence is identical to the current TopKAT system.
Totalizer Sequence (Online Mode)
The display will scroll to “ENTER EQUIPMENT #” since Keyless is the only entry mode.
Upon selecting the equipment number, the display shows:
EQUIPMENT #:
(the selected number is shown here)
Press Enter and the display shows:
“Retrieving data.
please wait”
The Equipment number is sent to the PC, which returns the Equipment Record to the TopKAT
system.
If an Equipment Record is not found, the display shows “NO EQUIPMENT RECORD”.
This is displayed for 3 seconds and the sequence is terminated.
If an Equipment Record is not received within 15 seconds, the TopKAT system reverts to
Fallback described in
“Offline Scenario 2” on page A-7 .
If a successful Equipment Number entry has been made, the display then shows the prompts in
the following sequence:
“ENTER PUMP #:
ENTER READING: (expressed as XXXXXXXX.XX)
READING RECORDED”