Gasboy TopKAT Online Operation Manual - Manual (Page 35)

MDE-4589 PC TopKAT™ Online Operation and Setup Manual · August 2010 Page 31
Setting Up the PC Online Software (Quick Start) Using the PC TopKAT Online Software
• Select Location - Allows you to select a different location if more than one location exists
at this site.
• Fuel Location - Will display the selected location.
• Tank Table Description - Select unlead or diesel from the list of options that was
previously set in Setup/Tank Table:
- Tank “One” must be unlead
- Tank “Two” must be diesel
Note: These settings must correspond to the values set at the Online TopKAT system and
the excel spreadsheet for totals.
• Tilt Offset - Enter a tilt offset, if required.
Completing the Setup of Tank Tables
Note: You can now add, edit, or delete the Tank Table data.
Figure 10-9: Tank Table Setup Window
As most sites have a Tank Monitor ™ installed, few have used this feature fully. Most have just
used 1 inch equals 1000 gallons for convenience.
Tank charts can be imported. For more information on importing tank charts, refer to the Help
Topic/Contents/Tank tables.