Gasboy TopKAT Online Operation Manual - Manual (Page 22)

Setting Up Wireless Modems Coyote Radio Software
Page 18 MDE-4589 PC TopKAT™ Online Operation and Setup Manual · August 2010
14 Ensure that the Communications Port Baud Rate option is set to the baud rate being used at the
TopKAT system (2400, 4800, or 9600, 9600 is preferred).
15 Select Write to save the values entered on this screen.
16 Select Read to ensure that the settings were properly saved.
• During background polling, the PC Online software sets the destination address of the
wireless modem connected to the PC to “0”.
• This setting allows the PC modem to issue a broadcast command that can be heard by all
the Online TopKAT(s) wireless modems.
• When the user selects the “Contact TopKAT” system option, the PC Online software sets
the destination address of the modem connected to the PC to the value of the poll address
for the selected Online TopKAT and enables Ack-back.
• This ensures that only the modem of the requested Online TopKAT system hears the
command.
Connection Type Source Address Destination Address
Radio connected to PC 100 1
Modem connected to
TopKAT system Match TopKAT system poll address 100