beautypg.com

Electronic pump interfaces, Tokheim – Gasboy CFN III Quick Reference Guide v3.3 User Manual

Page 53

background image

CFN III Quick Reference

MDE-4483 CFN III Quick Reference Guide v3.3 · August 2005

Page 49

Electronic

Pump

Interfaces

Tokheim

Single Channel To Tokheim 67 Box or 98 Box

For single channel use Tokheim cable, C07081.

98 Box

TALK DISP should be connected to +9V with a

1K Ohm resistor. DC COM should be connected to
GND.

Dual Channel To Tokheim 67 Box or 98 Box

Dual Channel to Tokheim 67 or 98 box, use cable

C05996 that has the following layout.

CFN3 Pump Configuration
In the PUMP configuration program, in submenu 1,
set Maximum Units to Gallons and Maximum
Amount to 999 Gallons.
In the PUMP configuration program, in submenu 3,
set the following options:

Tokheim type

Options to set

162/262

2,7

262-A

2,7,8,9,13

SA MMD

1,2,7,8,9

SA MMD $/Cr

1,2,3,7,8,9

TCS

1,2,7,8,9,13

TCS $/Cr

1,2,3,7,8,9,13

TCS 1 hose blend

1,2,7,8,9,12,13,19

TCS 1 hose blend $/Cr

1,2,3,7,8,9,12,13,19

TCS 1 hose, multigrade, non-blend 1,2,7,8,9,13,19

TCS 1 hose, multigrade non blend $/Cr

1,2,3,7,8,9,13,19

Premier

1,2,7,8,9,13,16

Premier $/Cr

1,2,3,7,8,9,13,16

Premier 1 hose blend

1,2,7,8,9,13,16,19

Premier 1 hose blend $/Cr

1,2,3,7,8,9,13,16,19

Premier blender

1,2,7,8,9,13,16

Premier blender $/Cr

1,2,3,7,8,9,13,16

Premier 1 hose, 1 prod

2,7,8,9,13,16

Premier 1 hose, 1 prod $/Cr

1,2,3,7,8,9,13,16

Premier 1 hose, multigrade

1,2,7,8,9,13,16,19

Premier 1 hose, multigrade $/Cr

1,2,3,7,8,9,13,16,19

The options in the above table are:
1 Pump is a multi-product dispenser.
2 Pump always needs switch detect (off-hook) to

activate.

3 Pump has a cash-credit select button. (Customer

can choose cash or credit payment at the pump.)

4 Site Controller can activate the pump without

knowing the price or hose (for some MPDs).

5 Site Controller cannot choose the hose number

or price (for some MPDs).

6 Site Controller cannot get the dollar amount or

volume during pumping.

7 Pump can’t do switch detect or pulser timeouts

(timeouts must be done by the driver).

8 Pump is a Tokheim stand-alone dispenser or

Gasboy SPD v4.3+/PAC v4.2+.

9 Pump can only be activated from downloaded

prices (the displayed prices are downloaded).

10 Pump never needs switch detect to activate (can

be activated while it is still on-hook).

11 The PCU is slow to respond to requests

(improves performance on pumps that are

Site Contr

oller

Male DB-9
Connector

Tokheim
16-pin Amp cir

cular

connectors

1 TTDA
2
3 TTCA

TTDB 4

5

TTDA 2

6 DCCA

TTCB 5

10

TTCA 3

1 TTDB

DCCB 6

2

DCCA 7

3 TTCB
5
6 DCCB
10

This manual is related to the following products: