beautypg.com

Standalone receipt printer, Epson, Star – Gasboy CFN III Quick Reference Guide v3.3 User Manual

Page 36

background image

CFN III Quick Reference

Page 32

MDE-4483 CFN III Quick Reference Guide v3.3 · August 2005

Standalone

Receipt

Printer

Epson

Dip Switch Settings

Set 1

Switch Setting

Function

1-1

OFF

Data Errors
Print as “?”

1-2

OFF

4K Buffer

1-3

OFF

DTR/DSR
Handshaking

1-4

OFF

8 Bits Data
Word

1-5

OFF

Parity Check

Disabled

1-6

OFF

Parity Odd

1-7

ON

9600 Baud

1-8

OFF

Transmission
Speed

Set 2

Switch Setting

Function

2-1

OFF

Busy, Off Line
or Buffer Full

2-2

OFF

Fixed Off

2-3

OFF

Normal Print
Density

2-4

OFF

Normal Print
Density

2-5

OFF

Fixed Off

2-6

OFF

Fixed Off

2-7

OFF

Reset Pin 6
Disabled

2-8

OFF

Reset Pin 25

Disabled

Star

Self Test

To start any Star printer’s self test and display its
switch settings, turn its power on while pressing
down on FEED.

Star (RS-422)

The part number is C06244; the adapter is C06243;
and the cable is C06242. This printer works with both
console CPU boards, C04832 and C05836.

This printer does not allow the use of a PIN pad. On
CPU board C05836, set the console printer/pad
configuration to none.

Configure as type 3 in the Reader configuration
program, menu 3 (parameters).

The Star printer has four DIP switch banks:
DIP Switch Bank 1. Positions 1-4 and 6 are always
closed; positions 7 and 8 are always open. Position 5
governs the height of the line feed: open=1/8 of an
inch; closed (default)=1/6 of an inch.
DIP Switch Bank 2. All 8 positions on DIP switch
bank 2 should always be closed, with the possible
exception of position 4, which sets the paper width:
closed (default)=3-inch or 3.25-inch paper; open=2.5-
inch paper.
DIP Switch Bank 3. Positions 1-4 and 6-8 should
always be closed; position 5 should always be open.
DIP Switch Bank 4. Switch 4, which has 4 positions,
sets the address of the printer, as shown in the
following chart. Note that the Star printer can never
be address 4.

Address 4-1

4-2

4-3

4-4

1

op

Cl

cl

cl

2

cl

Op

cl

cl

3

op

Op

cl

cl

5

op

Cl

op

cl

6

cl

Op

op

cl

7

op

Op

op

cl

8

cl

Cl

cl

op

9

op

Cl

cl

op

10

cl

op

cl

op

11

op

op

cl

op

12

cl

cl

op

op

13

op

cl

op

op

14

cl

op

op

op

Jumper B and C on SW5 and SW6.

This manual is related to the following products: