Comtech EF Data MDX420 SkyWire Manual - Manual (Page 50)

MDX420 SkyWire™ Satellite Network Gateway Terminal Screens
MN-MDX420 Revision 6 6–12
6.2.4.8 TCP/IP/FTP Controls
TCP/IP (menu)
BOOT
MODE
{DEFAULT, NON-VOL, BOOTP, IP TEST}
DEFAULT: During initialization (boot up), the gateway will restore the web setting to the
standard IP Mask and addresses supplied by the gateway. The gateway will be taken off
the network and will not be accessible. The Default settings are:
IP Address Mask:
255.000.000.000 (FF.00.00.00 hex)
Gateway IP Address: 010.000.000.001 (C0.A8.00.EE hex)
Server IP Address: 010.001.001.001 (0A.01.01.01 hex)
Router IP Address: 010.000.001.001 (0A.00.01.01 hex)
BOOTP: During initialization (boot up), the gateway will get the names, masks, and IP
Addresses of the gateway, router, and server.
NON-VOL: Stores and uses IP Mask and addresses as provided by the user.
IP TEST: Stores and uses IP Mask and addresses to fixed settings as listed below.
Bootp Server Tag:
206
IP Address Mask: 255.255.255.000 (FF.FF.FF.00 hex)
Gateway IP Address: 192.168.0.238 (C0.A8.00.EE)
Server IP Address: 192.168.000.101 (C0.A8.00.65)
BOOTp
SERVER {128 – 257, default is 206}
Only used if Bootp is selected in Boot Mode. Should be consistent with the tag expected
by the users Bootp Server.
LOCAL
HOST NAME The Local Host Name for the network.