Comtech EF Data MDX420 SkyWire Manual - Manual (Page 46)

MDX420 SkyWire™ Satellite Network Gateway Terminal Screens
MN-MDX420 Revision 6 6–8
6.2.4.4 System Controls
SYSTEM CONTROLS
FEATURE ID 1234.1234.1234
This displays the current Feature ID. This feature code is used to define available
feature within the Gateway. This code is also used for purchased feature
upgrades. Feature code is different for every unit. (Refer to Appendix A).
Contact the Comtech Sales Department for hardware and software upgrades.
GATEWAY ID Fixed ID
This is the unique ID that each MDX420 shipps with. This unique ID will be
required by the SkyWire Configuration Controller and should be recorded by the
network administrator.
MODE {FACTORY DEMO, NORMAL}
Identifies the features ID mode options. Factory Demo mode is used when a 30
day demo key is requested through a sales person and will enable all software
features for 30 operational days. After 30 operational days the unit will remove all
un-purchased options and revert back to Normal mode.
CANCEL DEMO Allows user to cancel Factory Demo Mode.
Once Demo Mode has been cancelled, the Demo ID will no longer be valid.