Comtech EF Data MDX420 SkyWire Manual User Manual

Page 108

Text mode
Original mode

MDX420 SkyWire™ Satellite Network Gateway

TCP/IP Ethernet Setup

MN-MDX420 Revision 6

B–4

The Computer TCP/IP must be properly configured in order to obtain connectivity. The following
set-up procedure can be used as a guide to aide in this setup. The following instructions apply
only to Windows 2000 or XP Classic.

1. Click on the Start Button. Select Settings and click on the Control Panel Icon. Double click

the Network Connections Icon.

2. Select the Local Area Connection icon for the applicable Ethernet adapter. Usually it is the

first Local Area Connection listed. Double click the Local Area Connection. Click on the
Properties icon.

Local Area Connection Status Box

3. Make sure that the box next to the Internet Protocol (TCP/IP) is checked. Highlight

Interconnect Protocol (TCP/IP) and click on the Properties button.