Comtech EF Data MDX420 SkyWire Manual - Manual (Page 49)

MDX420 SkyWire™ Satellite Network Gateway Terminal Screens
MN-MDX420 Revision 6 6–11
6.2.4.7 System Alarms
TERR FPGA CFG
{Pass/Fail, Unmasked/Masked}
Indicates an Interface Card FPGA configuration failure.
GLUE FPGA {Pass/Fail, Unmasked/Masked}
Indicates Glue FPGA configuration failure.
+1.2V RX SUPPLY Displays the measured voltage of the 1.2 Volt power bus located inside the
gateway.
+1.8V TX SUPPLY Displays the measured voltage of the 1.8 Volt power bus located inside the
gateway.
+3.3V SUPPLY Displays the measured voltage of the +3.3 Volt power bus located inside the
gateway.
+5V SUPPLY Displays the measured voltage of the +5 Volt power bus located inside the
gateway.
+12V SUPPLY Displays the measured voltage of the +12 Volt power bus located inside the
gateway.
+24V SUPPLY Displays the measured voltage of the +24 Volt power bus located inside the
gateway.
CLEAR LATCHED Allows the user to reset the latched alarms by selecting