Comtech EF Data MDX420 SkyWire Manual User Manual

Page 43

Text mode
Original mode

MDX420 SkyWire™ Satellite Network Gateway

Terminal Screens

MN-MDX420 Revision 6

6–5

DATA RATE (bps)

{Refer to Technical Specs for Data Rates}
Allows the user to set the Data Rate in bps steps via the Terminal Screen

SYMB RATE (sps)

{256000 - 10000000}
Allows the user to set and or view the Symbol Rate.

INNER FEC

Turbo{.710, .793}
Allows the user to select the RX Code Rate

DEMODULATION {QPSK,

8PSK}

Allows the user to select the demodulation type.

RESET REMOTES

CAUTION: Resetting the remote will disable the burst demodulator and erase the
entire configuration table associated with that burst demodulator. This selection
should only be used to reset the burst demodulator to a known starting point or to
erase a previous configuration.