Comtech EF Data KPA - Manual (Page 74)

KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Ethernet Management MN/KPA.IOM
6–12
• Baud Rate: Use the drop-down menu to select the baud rate as 2400, 4800, 9600, 19200,
or 38400.
• Data Format – Data Bits: Use the drop-down menu to select the Data Bits as 8 or 7.
• Data Format – Stop Bits: Use the drop-down menu to select the Data Bits as 1 or 2.
• Data Format – Parity: Use the drop-down menu to select Parity as Odd, Even, or None.
Once the desired configuration settings have been made in this section, the user should then click
[Change Serial Configuration] to save these changes. Otherwise, click [Reset] to cancel any
changes and restore the previously saved parameters.
Alarm Mask
Use the drop-down menu to define the External Reference Lock Detected alarm as Masked or
Active, then click [Submit] to save this setting.