Comtech EF Data KPA - Manual (Page 70)

KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Ethernet Management MN/KPA.IOM
6–8
6.5.4.2 Admin pages
The ‘Admin’ pages provide the means to set up the access parameters required to facilitate
communication with the KPA Web Server Interface.
IMPORTANT
The Admin pages are available only to users who have logged in using the
Administrator Name and Password.
Select the Access or SNMP hyperlink to continue.
6.5.4.2.1 Admin | Access page
Figure 6-3. Admin | Access page
The ‘Admin | Access’ page (Figure 6-3) provides the means to set up user names, passwords, the
e-mail server, and the host IP addresses to facilitate communication with the KPA Web Server
Interface.
Network Maintenance
• IP Gateway: Enter an IP Gateway Address for the Ethernet M&C port for this unit.
• IP Address/Range: Enter an IP address and a subnet mask to define a unique class of
machines that are allowed access.
• MAC Address: This parameter is read-only and cannot be changed.
Once the desired changes have been made in this section, click [Change IP Address] to save these
settings. Otherwise, click [Reset] to cancel any changes and restore the previously saved
parameters.