Comtech EF Data KPA - Manual (Page 71)

KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Ethernet Management MN/KPA.IOM
6–9
System Account Access Information
• Read/Write, Read Only and Admin Names and Passwords:
The factory defaults for these names/passwords are:
o Read Only monitor/1234
o Read/Write opcenter/1234
o Admin comtech/comtech
Note the following:
o These Name fields can be any alphanumeric combination with a maximum
length of 10 characters.
o These Password fields can be any alphanumeric combination with a maximum
length of 10 characters.
• SMTP Server: Specify the mail server IP address from where e-mail is to be sent.
• SMTP Domain Name / Destination: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the ‘Home | Support’
page (Sect. 6.5.3.2) is to be used.
o For SMTP Domain Name, specify the domain of the e-mail server (usually
found to the right of the @ symbol in an e-mail address).
o For SMTP Domain Destination, specify the e-mail recipient name (usually
found to the left of the @ symbol in an e-mail address).
Once the desired configuration settings have been made on this page, click [Submit Admin] to
save these changes.