Comtech EF Data MIDAS Management Information Base - Manual (Page 87)

Management Information Base , Rev. 1
Appendix A, MIB Listing A-71
ACCESS read-only
STATUS mandatory
::= { controlChannelTableEntry 301 }
ctrlChanInboundFirstAllocUnit OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-only
STATUS mandatory
::= { controlChannelTableEntry 302 }
ctrlChanInboundNumAllocUnits OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-only
STATUS mandatory
::= { controlChannelTableEntry 303 }
-- Unit in Hz
ctrlChanInboundTxCenterIF OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Center Intermediate Frequency (IF) of
the Inbound Control Channel, for the burst
transmissions sent to the NMS from the various
network elements. This field allows the operator
to define the IF frequencies on which
the various network elements will transmit to the
NMS. Accordingly, the nodes' Inbound Center
frequencies (via the User Port) are set to receive
the Outbound Control Channel transmissions. "
::= { controlChannelTableEntry 304 }
-- unit in KHz
ctrlChanOutboundLBandFreq OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the L-band Frequency
of the Outbound Control Channel, the
continuous carrier that is transmitted from
the NMS to the various network elements.
This field allows the operator to define
L-band frequencies on which
the NMS will transmit to the nodes.
Accordingly, the nodes' Inbound Center
frequencies are set (via the User Port) to
receive the Outbound Control Channel
transmissions. "
::= { controlChannelTableEntry 401 }
-- unit in KHz
ctrlChanInboundLBandFreq OBJECT-TYPE