beautypg.com

Comtech EF Data MIDAS Management Information Base User Manual

Page 164

background image

Management Information Base

,

Rev. 1

A-148 Appendix A,

MIB Listing

-- m.2.4.1.1.1.n none
"Database Channel record added"
-- m.4.2.1.1.1.n none
"Database ChnHGrp record added"
-- m.4.3.1.1.1.n none
"Database Dir record added"
-- m.4.1.1.1.1.n none
"Database HGrp record added"
-- m.3.1.1.1.1.n none
"Database ControlChannel record added"
-- m.4.4.1.1.1.n none
"Database Circuit record added"
-- m.3.3.1.1.1.n none
"Database Band record added"
-- m.2.1.1.1.1.n none
"Database SiteType record added"
-- m.2.2.1.1.1.n none
"Database Site record added"
-- m.4.5.1.1.1.n none
"Database 1Mult record added"
-- m.4.6.1.1.1.n none
"Database 1MultDir record added"
-- m.3.2.1.1.1.n none
"Database Pool record added"
-- m.3.4.1.1.1.n none
"Database Transponder record added"
-- (71) m.4.7.1.1.1.n
m.2.3.1.1.1.n "Power was too high, was set to maximum"
-- (107) m.4.4.1.1.1.n none
"RTS Circuit xxxx or Calling node does not exist"
--
"RTS Circuit xxxx is changed, to synchronize to node"
-- (111) m.2.3.1.1.1.n none
"Node Startup: Invalid active call sequence (nnnn,m) terminated"
-- (112) m.2.3.1.1.1.n none
"Node Startup: Invalid offline active call (nnnn,m) terminated"
-- (114) m.4.7.1.1.1.n none
"Normal remote termination"
--
"No answer timer expired"
--
"User went on-hook"
--
"User port termination"
--
"RTS went inactive"
--
"Call time expired"
-- (115) m.2.3.1.1.1.n none
"Node startup timeout"
-- (116) m.2.3.1.1.1.n none
"Node Startup: DAC startup bad response for node nnnn"
--
"Node Startup nnnn invalid response"
-- (117) m.2.3.1.1.1.n none
"Config Report (nnnn,0). Node not in internal mode"