Comtech EF Data MIDAS Management Information Base - Manual (Page 152)

Management Information Base , Rev. 1
A-136 Appendix A, MIB Listing
ccallUpLinkParamsAEncode OBJECT-TYPE
SYNTAX
TENCODE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select the encoding type. Choices
include: Viterbi, Sequential, etc."
::= { completedCallRecTableEntry 108 }
ccallUpLinkParamsAVoiceProtocol OBJECT-TYPE
SYNTAX
TVPROTOCOL
ACCESS read-only
STATUS mandatory
::= { completedCallRecTableEntry 109 }
ccallUpLinkParamsAInterfaceBuffer OBJECT-TYPE
SYNTAX
LONGINT
ACCESS read-only
STATUS mandatory
::= { completedCallRecTableEntry 110 }
ccallUpLinkParamsADvbFrame OBJECT-TYPE
SYNTAX
TDVBFRAME
ACCESS read-only
STATUS mandatory
::= { completedCallRecTableEntry 111 }
ccallUpLinkParamsBModulation OBJECT-TYPE
SYNTAX
TMODULATION
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
modulation standard to be used for the
connection. Choices include: BPSK, QPSK,
8PSK, 16QAM, etc."
::= { completedCallRecTableEntry 201 }
ccallUpLinkParamsBFECRate OBJECT-TYPE
SYNTAX
TFECRATE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select the forward error correction
rate (FEC) to be used for the channel.
Choices include:1/2, 2/3, 3/4, 5/6, 7/8,
etc."
::= { completedCallRecTableEntry 202 }
ccallUpLinkParamsBDataRate OBJECT-TYPE
SYNTAX
LONGINT
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Select the data rate from the list of
available choices, or enter any data