Comtech EF Data MIDAS Management Information Base User Manual
Page 86

Management Information Base
,
Rev. 1
A-70 Appendix A,
MIB Listing
"2: to delete control channel
Before control channel is deleted, all of nodes
under control channel should be deleted."
::= { controlChannelTableEntry 99 }
ctrlChanModemChannelA OBJECT-TYPE
SYNTAX
TMODEMCHANNEL
ACCESS read-write
STATUS mandatory
::= { controlChannelTableEntry 101 }
ctrlChanModemChannelB OBJECT-TYPE
SYNTAX
TMODEMCHANNEL
ACCESS read-write
STATUS mandatory
::= { controlChannelTableEntry 102 }
ctrlChanOutboundBandManID OBJECT-TYPE
SYNTAX
WORD
ACCESS read-only
STATUS mandatory
::= { controlChannelTableEntry 201 }
ctrlChanOutboundFirstAllocUnit OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-only
STATUS mandatory
::= { controlChannelTableEntry 202 }
ctrlChanOutboundNumAllocUnits OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-only
STATUS mandatory
::= { controlChannelTableEntry 203 }
-- Unit in Hz
ctrlChanOutboundTxCenterIF OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Center Intermediate Frequency
(IF) of the Outbound Control Channel, the
continuous carrier that is transmitted from
the NMS to the various network elements.
This field allows the operator to define
the IF frequencies on which
the NMS will transmit to the nodes.
Accordingly, the nodes' Inbound Center
frequencies are set (via the User Port) to
receive the Outbound Control Channel
transmissions.
"
::= { controlChannelTableEntry 204 }
ctrlChanInboundBandManID OBJECT-TYPE
SYNTAX
WORD