Comtech EF Data MIDAS Management Information Base - Manual (Page 120)

Management Information Base , Rev. 1
A-104 Appendix A, MIB Listing
"To select Enable/Disable Reed-Solomon."
::= { circuitTableEntry 107 }
circuitUpLinkParamsAEncode OBJECT-TYPE
SYNTAX
TENCODE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To select the encoding type. Choices
include: Viterbi, Sequential, etc."
::= { circuitTableEntry 108 }
circuitUpLinkParamsAVoiceProtocol OBJECT-TYPE
SYNTAX
TVPROTOCOL
ACCESS read-write
STATUS mandatory
::= { circuitTableEntry 109 }
circuitUpLinkParamsAInterfaceBuffer OBJECT-TYPE
SYNTAX
LONGINT
ACCESS read-write
STATUS mandatory
::= { circuitTableEntry 110 }
circuitUpLinkParamsADvbFrame OBJECT-TYPE
SYNTAX
TDVBFRAME
ACCESS read-write
STATUS mandatory
::= { circuitTableEntry 111 }
circuitUpLinkParamsBModulation OBJECT-TYPE
SYNTAX
TMODULATION
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
modulation standard to be used for the
connection. Choices include: BPSK, QPSK,
8PSK, 16QAM, etc."
::= { circuitTableEntry 201 }
circuitUpLinkParamsBFECRate OBJECT-TYPE
SYNTAX
TFECRATE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
forward error correction rate (FEC) to
be used for the channel. Choices include:
1/2, 2/3, 3/4, 5/6, 7/8, etc."
::= { circuitTableEntry 202 }
circuitUpLinkParamsBDataRate OBJECT-TYPE
SYNTAX
LONGINT
ACCESS read-write
STATUS mandatory
DESCRIPTION