Comtech EF Data MIDAS Management Information Base - Manual (Page 36)

Management Information Base , Rev. 1
A-20 Appendix A, MIB Listing
::= { sysVideoASetup 1 }
videoAsetupModulation OBJECT-TYPE
SYNTAX
TMODULATION
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
modulation standard to be used for the
connection. Choices include: BPSK, QPSK,
8PSK, 16QAM, etc."
::= { sysVideoASetup 2 }
videoAsetupDataRate OBJECT-TYPE
SYNTAX
THALFLONGWORD
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Select the data rate from the list of
available choices, or enter any data
rate that is valid for the traffic
modem."
::= { sysVideoASetup 3 }
videoAsetupFECRate OBJECT-TYPE
SYNTAX
TFECRATE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To select the forward error correction
rate (FEC) to be used for the channel.
Choices include:1/2, 2/3, 3/4, 5/6, 7/8,
etc."
::= { sysVideoASetup 4 }
videoAsetupEncode OBJECT-TYPE
SYNTAX
TENCODE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To select the encoding type. Choices
include: Viterbi, Sequential, etc."
::= { sysVideoASetup 5 }
videoAsetupReedSolomon OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To select Enable/Disable Reed-Solomon."
::= { sysVideoASetup 6 }
videoAsetupClockMode OBJECT-TYPE
SYNTAX
TCLOCKMODE
ACCESS read-write
STATUS mandatory
DESCRIPTION