Comtech EF Data MIDAS Management Information Base - Manual (Page 153)

Management Information Base , Rev. 1
Appendix A, MIB Listing A-137
rate that is valid for the traffic
modem."
::= { completedCallRecTableEntry 203 }
ccallUpLinkParamsBPowerLevel OBJECT-TYPE
SYNTAX
REAL
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field allows the operator to enter
the TX power level setting of the traffic
modem. Power range limits (0 to -30 dBm) "
::= { completedCallRecTableEntry 204 }
ccallUpLinkParamsBClockMode OBJECT-TYPE
SYNTAX
TCLOCKMODE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This allows the operator to select the clock
mode. Choices include: Terrestrial, Internal,
Satellite, and External Reference."
::= { completedCallRecTableEntry 205 }
ccallUpLinkParamsBPreset OBJECT-TYPE
SYNTAX
TPRESET
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
preset option for the traffic modem.
Choices depend on the modem type, but
generally include: No, A, B, C, D. For
modems with no presets, this is always
set to No. Choosing a preset overrides
the Modulation, FEC Rate, and Data Rate
settings."
::= { completedCallRecTableEntry 206 }
ccallUpLinkParamsBReedSolomon OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select Enable/Disable Reed-Solomon."
::= { completedCallRecTableEntry 207 }
ccallUpLinkParamsBEncode OBJECT-TYPE
SYNTAX
TENCODE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select the encoding type. Choices
include: Viterbi, Sequential, etc."
::= { completedCallRecTableEntry 208 }
ccallUpLinkParamsBVoiceProtocol OBJECT-TYPE