Comtech EF Data MIDAS Management Information Base - Manual (Page 167)

Management Information Base , Rev. 1
Appendix A, MIB Listing A-151
-- (136) m.3.1.1.1.1.n none
"Excessive offset on MIDAS control channel"
-- (137) m.2.3.1.1.1.n none
"Excessive offset on node ctrl channel"
-- (146) m.2.3.1.1.1.n none
"Frequency alignment performed for node"
-- (147) none none
"Frequency alignment performed for NMS"
-- (148) m.2.3.1.1.1.n none
"Invalid parameter in inbound CC message"
-- (151) m.2.4.1.1.1.n none
"Attempt to disable channel failed"
-- (152) m.2.4.1.1.1.n none
"Attempt to enable channel failed"
-- (153) m.2.4.1.1.1.n none
"ISDN Dica is off line or on line"
-- (155) none none
"Invalid Dongle Key"
midasTrapEvent TRAP-TYPE
ENTERPRISE
midas
VARIABLES { trapSequenceNumber, eventIndex, eventEventNo, eventOID1,
eventOID2, eventTime, eventDate, eventDesc }
DESCRIPTION
"MIDAS Event Traps are sent when an event
occurs in the MIDAS system which is
considered time critical. All events are
stored in the event table, and are available
to the NMS. The NMS should periodically
get the latest events by sending Get Next
requests starting from the last event in
its database. For time-critical events,
the MIDAS controller will send a trap in
addition to storing the event in the event
table. Initially the NMS will simply display
the event text, but in the future some action
may be required on the objects indicated in
OID1 and/or OID2. Many events are not listed
here. Some are not listed because they are
not important or time-sensitive enough to
warrant a trap. Others are not here because
special traps have been defined for them.
The purpose of those traps is primarily to
send specific status information to the NMS
so that it can update its database to stay
in sync with the controller."
::= 1
-- The Value Change trap gives a
general format for informing the Client that
-- a value in the database has
changed. The trap consists of one or more
-- OID, value pairs for the object(s)
which changed, typically one or more
-- fields from a record in a table.
midasTrapObjsUpdated TRAP-TYPE