Comtech EF Data MIDAS Management Information Base - Manual (Page 165)

Management Information Base , Rev. 1
Appendix A, MIB Listing A-149
--
"Int Node Config Report (nnnn,m). Mismatch in channel type"
--
"Config Report (nnnn,0). Node not in external mode"
--
"Config Report (nnnn,m). Mismatch in channel type"
--
"Config Report (nnnn,m). Mismatch in channel"
--
"Startup Report (nnnn,0), Node may not be in internal mode"
--
"Startup Report (nnnn,m), node may not be in external mode"
--
"Startup Report (nnnn,m), Channel status mismatch(E/D)"
-- (118) m.4.7.1.1.1.n none
"type call startup failed: circuit_desc event_description "
-- (125) none none
"Move of database to DBSAVE has failed"
--
"The connection between primary and secondary NMS is broken"
--
"PrimarySecondaryConnection sending fails"
--
"PrimarySecondaryConnection is not connected"
--
"PrimarySecondaryConnection SendQ is full"
--
"SendtoSendQ is full"
--
"The secondary NMS is shutdown because primary NMS is too
--
busy to transfer db"
--
"SendQ in PrimarySecondaryConnection is full"
--
"Server SendQ is full"
--
"PrimarySecondaryConnection is broke"
--
"PrimarySecondaryConnection SendQ is full"
--
"NMS fails to communicate to the control channel modem A"
--
"NMS fails to communicate to the link sync modem A"
--
"NMS fails to communicate to the control channel modem B"
--
"NMS fails to communicate to the link sync modem B"
--
"The control channel modem A is set online, auto"
--
"The link sync modem A is set online, auto"
--
"The control channel modem B is set online, manual"
--
"The link sync modem B is set online, manual"