Comtech EF Data MIDAS Management Information Base - Manual (Page 124)

Management Information Base , Rev. 1
A-108 Appendix A, MIB Listing
"Enabled/Disabled circuit"
::= { multiPointCircuitTableEntry 3 }
multipointcircuitOneMultStatus OBJECT-TYPE
SYNTAX
TCIRCUITSTATUS
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the activation status of the circuit."
::= { multiPointCircuitTableEntry 4 }
multipointcircuitConnectivity OBJECT-TYPE
SYNTAX
TCONNECTIVITY
ACCESS read-write
STATUS mandatory
::= { multiPointCircuitTableEntry 5 }
multipointcircuitBroadCast OBJECT-TYPE
SYNTAX
OCTETSTRING30
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the directory number of the current
broadcaster."
::= { multiPointCircuitTableEntry 6 }
multipointcircuitReturn OBJECT-TYPE
SYNTAX
OCTETSTRING30
ACCESS read-write
STATUS mandatory
::= { multiPointCircuitTableEntry 7 }
multipointcircuitOperationTag OBJECT-TYPE
SYNTAX
TOPERATION
ACCESS read-write
STATUS mandatory
::= { multiPointCircuitTableEntry 99 }
multipointcircuitAModulation OBJECT-TYPE
SYNTAX
TMODULATION
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
modulation standard to be used for the
connection. Choices include: BPSK, QPSK,
8PSK, 16QAM, etc."
::= { multiPointCircuitTableEntry 101 }
multipointcircuitAFECRate OBJECT-TYPE
SYNTAX
TFECRATE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To select the forward error correction
rate (FEC) to be used for the channel.
Choices include:1/2, 2/3, 3/4, 5/6, 7/8,