Comtech EF Data MIDAS Management Information Base - Manual (Page 143)

Management Information Base , Rev. 1
Appendix A, MIB Listing A-127
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
preset option for the traffic modem.
Choices depend on the modem type, but
generally include: No, A, B, C, D. For
modems with no presets, this is always
set to No. Choosing a preset overrides
the Modulation, FEC Rate, and Data Rate
settings."
::= { activeCallTableEntry 1106 }
activecallLinkParamsAReedSolomon OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select Enable/Disable Reed-Solomon."
::= { activeCallTableEntry 1107 }
activecallLinkParamsAEncode OBJECT-TYPE
SYNTAX
TENCODE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select the encoding type. Choices
include: Viterbi, Sequential, etc."
::= { activeCallTableEntry 1108 }
activecallLinkParamsAVoiceProtocol OBJECT-TYPE
SYNTAX
TVPROTOCOL
ACCESS read-only
STATUS mandatory
::= { activeCallTableEntry 1109 }
activecallLinkParamsAInterfaceBuffe OBJECT-TYPE
SYNTAX
LONGINT
ACCESS read-only
STATUS mandatory
::= { activeCallTableEntry 1110 }
activecallLinkParamsADvbFrame OBJECT-TYPE
SYNTAX
TDVBFRAME
ACCESS read-only
STATUS mandatory
::= { activeCallTableEntry 1111 }
activecallLinkParamsBModulation OBJECT-TYPE
SYNTAX
TMODULATION
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MODULATION
This allows the operator to select the
modulation standard to be used for the
connection. Choices include: BPSK, QPSK,
8PSK, 16QAM, etc."