Comtech EF Data MIDAS Management Information Base - Manual (Page 144)

Management Information Base , Rev. 1
A-128 Appendix A, MIB Listing
::= { activeCallTableEntry 1201 }
activecallLinkParamsBFECRate OBJECT-TYPE
SYNTAX
TFECRATE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FEC RATE
To select the forward error correction
rate (FEC) to be used for the channel.
Choices include:1/2, 2/3, 3/4, 5/6, 7/8,
etc."
::= { activeCallTableEntry 1202 }
activecallLinkParamsBDataRate OBJECT-TYPE
SYNTAX
LONGINT
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Select the data rate from the list of
available choices, or enter any data
rate that is valid for the traffic
modem."
::= { activeCallTableEntry 1203 }
activecallLinkParamsBPowerLevel OBJECT-TYPE
SYNTAX
REAL
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field allows the operator to enter
the TX power level setting of the traffic
modem. Power range limits (0 to -30 dBm)"
::= { activeCallTableEntry 1204 }
activecallLinkParamsBClockMode OBJECT-TYPE
SYNTAX
TCLOCKMODE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To select the clock mode. Choices include:
Terrestrial, Internal, Satellite, and
External Reference."
::= { activeCallTableEntry 1205 }
activecallLinkParamsBPreset OBJECT-TYPE
SYNTAX
TPRESET
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This allows the operator to select the
preset option for the traffic modem.
Choices depend on the modem type, but
generally include: No, A, B, C, D. For
modems with no presets, this is always
set to No. Choosing a preset overrides
the Modulation, FEC Rate, and Data Rate