Comtech EF Data MIDAS Management Information Base - Manual (Page 58)

Management Information Base , Rev. 1
A-42 Appendix A, MIB Listing
-- none and video/external is the same as
data/external
nodeExtFlag OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-write
STATUS mandatory
DESCRIPTION
"2: external, 1: internal
INTERNAL
This allows the operator to select INTERNAL,
to set the modem as an internal modem. When a
node is set to internal, only one channel can appear
in the Data Channels list. This single channel represents
the modem that switches to traffic mode from control
channel mode when a call is established.
EXTERNAL
This allows the operator to select EXTERNAL, to
set the modem as an external modem.
Can't change a node from external to internal or
vice verse when the node is enable
Internal node can't be video channel"
::= { nodeTableEntry 5 }
nodeControlChannelNo OBJECT-TYPE
SYNTAX
WORD
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Select the control channel to which the node is
assigned. Each node is allocated to one control
channel. Many nodes can belong to the same control
channel. However, the more nodes on the same control
channel, the greater the degradation of the control
channel performance."
::= { nodeTableEntry 6 }
nodeMeasuredCCEbNo OBJECT-TYPE
SYNTAX
REAL
ACCESS read-only
STATUS mandatory
::= { nodeTableEntry 7 }
nodeDACEditLevel OBJECT-TYPE
SYNTAX
BYTE
ACCESS read-only
STATUS mandatory
::= { nodeTableEntry 8 }
nodeDACVersionLo OBJECT-TYPE
SYNTAX
BYTE
ACCESS read-only
STATUS mandatory
::= { nodeTableEntry 9 }
nodeDACVersionHi OBJECT-TYPE
SYNTAX
BYTE