Comtech EF Data MIDAS Management Information Base - Manual (Page 28)

Management Information Base , Rev. 1
A-12 Appendix A, MIB Listing
ctrlstPrimaryStatusO OBJECT-TYPE
SYNTAX
TPRIMARYSTATUS
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a redundant setup, Primary Status
of the other controller"
::= { controllerStatus 5 }
ctrlstActiveStandbyStatusO OBJECT-TYPE
SYNTAX
TACTIVESTANDBYSTATUS
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the internal states of the other controller"
::= { controllerStatus 6 }
ctrlstConfiguredAsO OBJECT-TYPE
SYNTAX
TPRIMARYSTATUS
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If this object is primary or secondary, then MIDAS
is a redundant system. If this object is secondary,
then the current controller is configured as primary.
If this object is primary then the current controller
is configured as secondary"
::= { controllerStatus 7 }
ctrlstStartTime OBJECT-TYPE
SYNTAX
TTIME
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The starting running time of this controller"
::= { controllerStatus 8 }
ctrlstStartDate OBJECT-TYPE
SYNTAX
TDATE
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The starting running date of this controller"
::= { controllerStatus 9 }
-- This branch contains information
pertaining
-- system configuration and the
redundant operation
systemSetup OBJECT IDENTIFIER ::= { system 3 }
sysParameters OBJECT IDENTIFIER ::= { systemSetup 1 }
sysParaSatelliteName OBJECT-TYPE
SYNTAX
OCTETSTRING20
ACCESS read-write