Comtech EF Data MIDAS Management Information Base User Manual
Page 100

Management Information Base
,
Rev. 1
A-84 Appendix A,
MIB Listing
(low side injection) the RF frequencies.
Normally C Band is high side (True) and
Ku band is low side (FALSE)."
::= { transponderTableEntry 10 }
transponderFreqBand OBJECT-TYPE
SYNTAX
TFREQBAND
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Choose the satellite's frequency band.
Choices include: C-Band or Ku-Band.
For C-band, high-side injection is the default.
For Ku-band, low-side injection is the default."
::= { transponderTableEntry 11 }
transponderMaxPower OBJECT-TYPE
SYNTAX
REAL
ACCESS read-write
STATUS mandatory
::= { transponderTableEntry 12 }
transponderCurrentPower OBJECT-TYPE
SYNTAX
REAL
ACCESS read-only
STATUS mandatory
::= { transponderTableEntry 13 }
-- unit in Hz
transponderRFTranslationFactor OBJECT-TYPE
SYNTAX
REAL
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enter the value (in GigaHertz) for the Translation
Factor to be used for low- or high-side injection
calculations.
Translation Factor = RF Uplink RF Downlink
This is the difference between the up link
Frequency and down link frequency."
::= { transponderTableEntry 14 }
transponderOperationTag OBJECT-TYPE
SYNTAX
TOPERATION
ACCESS read-only
STATUS mandatory
::= { transponderTableEntry 99 }
modemTypes OBJECT IDENTIFIER ::= { resources 5 }
modemTypesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ModemTypesTableEntry
ACCESS not-accessible
STATUS mandatory
::= { modemTypes 1 }