Comtech EF Data MIDAS Management Information Base - Manual (Page 117)

Management Information Base , Rev. 1
Appendix A, MIB Listing A-101
circuitEnabled OBJECT-TYPE
SYNTAX
TENABLEDDISABLEDSTATUSTYPE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable circuit.
Can't enable/disable a circuit when the controller
mode is not normal"
::= { circuitTableEntry 9 }
circuitActivation OBJECT-TYPE
SYNTAX
TACTIVATIONTYPE
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This option group allows the operator to select
the Activation type. There are three types to
choose from:
PERMANENT this type of Predefined Connection
is typically used as a dedicated, exclusive
connection for guaranteed availability.
SCHEDULED CIRCUIT this type of Predefined
Connection is available only on an as scheduled
basis.
RTS/DTR Request to Send; this type of
Predefined Connection can only be established
from a remote site, and is typically used as an
emergency backup, for circuit restoration
purposes when terrestrial circuits fail."
::= { circuitTableEntry 10 }
circuitPriority OBJECT-TYPE
SYNTAX
WORD
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A High Priority call will preempt a Normal call if
no bandwidth is available.
Reserved for future use."
::= { circuitTableEntry 11 }
circuitBlocking OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-write
STATUS mandatory
::= { circuitTableEntry 12 }
circuitBumping OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-write
STATUS mandatory
::= { circuitTableEntry 13 }
circuitAccessByDirNum OBJECT-TYPE
SYNTAX
BOOLEAN
ACCESS read-write