Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 99)

Boot System
MVME8100 / MVME8110 Installation and Use (6806800P25G) 99
3. TFTP the files from the server to local memory, then boot:
run vxboot
5.4 MVME8100 / MVME8110 Specific U-Boot
Commands
Table 5-1 MVME8100 / MVME8110Specific U-Boot Commands
Command Description
base Print or set address offset
bdinfo Print board info structure
boot Boot default, i.e., run 'bootcmd'
bootd Boot default, i.e., run 'bootcmd'
bootelf Boot from an ELF image in memory
bootm Boot application image from memory
bootp Boot image through network using BOOTP/TFTP protocol
bootvx Boot VxWorks from an ELF image
cmp Memory compare
coninfo Print console devices and information
cp Memory copy
cpu Multiprocessor CPU boot manipulation and release
crc32 Checksum calculation
date Get/set/reset date & time
diags Runs POST diags
echo Echo args to console
exit Exit script
ext2load Load binary file from a Ext2 file system
ext2ls List files in a directory (default /)
fatinfo Print information about file system