Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 31)

Hardware Preparation and Installation
MVME8100 / MVME8110 Installation and Use (6806800P25G) 31
2.3 Requirements
Make sure that the board, when operated in your particular system configuration, meets the
requirements specified in the next sections.
2.3.1 Environmental Requirements
The following table lists the currently available specifications for the environmental
characteristics of the MVME8100 / MVME8110. A complete functional description of the
MVME8100 / MVME8110 baseboard appears in
Chapter 4, Functional Description .
The MVME8100 has ENP1 and ENP4 variants which comply with the following environmental
and regulatory specifications.
The MVME8110 has ENP1variant only which comply with the following environmental and
regulatory specifications.
For ENP1 boards, the operating temperatures refer to the temperature of the air circulating
around the board and not to the component temperature.
For ENP4 board, the operating temperature refers to the temperature at the card edge frame.
Table 2-2 MVME8100 / MVME8110 Specifications
Characteristics ENP1 ENP4
Cooling Method Forced Air Conduction
Operating temperature 0°C to +55°C –40°C to +85° C