Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 63)

Controls, LEDs, and Connectors
MVME8100 / MVME8110 Installation and Use (6806800P25G) 63
PMC Connectors
The MVME8100 / MVME8110 supports two PMC sites. The connector is located on the middle
portion of the board. It utilizes J14 to support PMC I/O that goes to RTM PMC.
15 GND 35 +3.3V
16 GND 36 +5V
17 NC 37 +3.3V
18 GND 38 +5V
19 NC 39 +3.3V
20 GND 40 +5V
Table 3-9 PMC J11/J21 Connector
Pin Name Signal Description Pin Name Signal Description
1 JTAG TCK 33 FRAME
2 -12V 34 GND
3 GND 35 GND
4 INT A 36 IRDY
5 INT B 37 DEVSEL
6 INT C 38 +5V
7 PRESENT SIGNAL 39 PCIXCAP
8 +5V 40 LOCK
9 INT D 41 NC
10 NC 42 NC
11 GND 43 PAR
12 NC 44 GND
13 PCI CLK 45 +3.3V
14 GND 46 AD 15
Table 3-8 Customized SATA Connector (continued)
Pin Name Signal Description Pin Name Signal Description