Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 32)

Hardware Preparation and Installation
MVME8100 / MVME8110 Installation and Use (6806800P25G) 32
Storage Temperature -40°C to +85°C -55°C to +105°C
Note: The MVME8100 ENP 4 version
includes NAND Flash memory in the form of
the eMMC. The specified storage limits for
the MVME8100 ENP 4 version are -55°C to
+105°C. However, it should be noted that
the industry standard (for Flash) as well as
the specific vendor of this component only
warrants performance (without data
degradation) from -40°C to +85°C. Storage
of the MVME8100 outside this range (while
supported by other components on the
board) may result in an unspecified
reduction in the data retention capabilities
of the eMMC.
Relative humidity To 95% RH To 100% RH
Vibration Sine (10min/axis) 2G, 5 to 500Hz 10G, 15 to 2000Hz
Vibration Random (1hr/axis) .002g/Hz, 15 to 2000Hz(2G RMS) 0.1g/Hz, 15 to 2000Hz (12GRMS)
Shock 20g/11mS 40g/11mS
Conformal Coating No Option (Acrylic)
Product Damage
High humidity and condensation on the board surface causes short circuits.
Do not operate the board outside the specified environmental limits.
Make sure the board is completely dry and there is no moisture on any surface before
applying power.
Table 2-2 MVME8100 / MVME8110 Specifications (continued)
Characteristics ENP1 ENP4