Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 102)

Boot System
MVME8100 / MVME8110 Installation and Use (6806800P25G) 102
The following procedure will replace the image in SPI bank 0:
1. Ensure FLASH_WP_N in SMT Configuration Switch (S3-1) is in the "OFF" position.
2. Select SPI flash # 0:
sf probe 0
3. Erase 0x90000 bytes starting at SPI address 0:
sf erase 0 0x90000
4. Write 0x90000 bytes from RAM address 0x1000000 starting at SPI address 0:
sf write 0x1000000 0 0x90000
To replace the image in SPI bank 1, replace step 2 with Select SPI flash # 1:
sf probe 1