Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 74)

Functional Description
MVME8100 / MVME8110 Installation and Use (6806800P25G) 74
4.3 Processor
The P5020 QorIQ processor combines two Power architecture processor cores with high-performance data
path acceleration logic and network, and peripheral bus interfaces required for networking,
telecom/datacom, wireless infrastructure and aerospace applications. The P5010 QorIQ processor has only
one power architecture processor core.
This device can be used for combined control, data path and application layer processing in routers,
switches, base station controllers, and general-purpose embedded computing. Its high level of integration
offers significant performance benefits compared to multiple discrete devices while also greatly simplifies
the board design.
The MVME8100 board ENP1 version is designed to use the 2.0 GHz core processor version while the ENP4
version uses the 1.8 GHz processor. The MVME8110 board ENP1 version is designed to use the 1.2 GHz core
processor.
For more information, refer P5020 / P5010 QorIQ Integrated Multicore Communications Processor Family
Reference Manual.
4.4 System Memory
The MVME8100 supports four GB DDR3 ECC memory using two banks of 2Gb memory devices. The
MVME8110 supports memory using one bank of 2Gb memory devices.
The memory devices are soldered-down and not modular solution using DIMM sockets. The supported data
rate is 1333MT/s. The memory is evenly-distributed across both memory channels (e.g. memory-capacity
requirement is 4GB, place 2GB of memory on each channel).
4.5 Timers
This section describes the timer functions implemented on MVME8100 / MVME8110.