Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 46)

Hardware Preparation and Installation
MVME8100 / MVME8110 Installation and Use (6806800P25G) 46
Read all notices and follow these steps to install a SATA drive on the baseboard.
Logic Ground to Chassis Ground Isolation
The MVME8100 / MVME8110 heat frames are isolated from the board logic ground.
Installing a SATA drive which has a metallic case connected to the drive logic ground will
result in a short between chassis ground and the MVME8100 / MVME8110 logic ground.
Damage of Circuits
Electrostatic discharge and incorrect installation and removal can damage circuits or
shorten their life.
Before touching the board or electronic components, make sure that you are working in an
ESD- safe environment.
Product Damage
Inserting or removing modules with power applied may result in damage to module
components.
Before installing or removing additional devices or modules, read the documentation that
came with the product.