Altera MAX 10 Embedded Memory - Manual (Page 59)

Option Legal Values Description
Do you want to specify the initial content
of the memory?
Yes, use this file for the
memory content data
Specifies the initial content of the
memory.
• To initialize the memory to zero,
select No, leave it blank.
• To use a Memory Initialization
File (.mif) or a Hexadecimal
(Intel-format) File (.hex), select
Yes, use this file for the memory
content data.
Note: The configuration
scheme of your device is
Internal Configuration.
In order to use memory
initialization, you must
select a single image
configuration mode with
memory initialization, for
example the Single
Compressed Image with
Memory Initialization
option. You can set the
configuration mode on
the Configuration page of
the Device and Pin
Options dialog box.
The initial content file should conform to
which port's dimension?
• PORT_A
• PORT_B
Specifies which port's dimension
that the initial content file should
conform to.
7-8 ROM:2-Port IP Core Parameters For MAX 10 Devices
UG-M10MEMORY
2015.05.04
Altera Corporation ROM: 2-PORT IP Core References
Send Feedback