Altera MAX 10 Embedded Memory - Manual (Page 51)

Option Legal Values Description
More Options • 'address' port
• 'q' port
On/Off Specifies whether the
address
and
q
ports are
cleared by the
aclr
port.
Create a 'rden' read enable signal On/Off Specifies whether to create a
rden
read enable signal.
Parameter Settings: Mem Init
Do you want to specify the initial content
of the memory?
Yes, use this file for the
memory content data.
Specifies the initial content
of the memory. In ROM
mode you must specify a
Memory Initialization File
(.mif) or a Hexadecimal
(Intel-format) File (.hex).
The configuration scheme of
your device is Internal
Configuration. In order to
use memory initialization,
you must select a single
image configuration mode
with memory initialization,
for example the Single
Compressed Image with
Memory Initialization
option. You can set the
configuration mode on the
Configuration page of the
Device and Pin Options
dialog box.
Allow In-System Memory Content Editor
to capture and update content independ‐
ently of the system clock
On/Off Specifies whether to allow
In-System Memory Content
Editor to capture and update
content independently of the
system clock.
The 'Instance ID' of this RAM is — Specifies the RAM ID.
6-6 ROM: 1-PORT IP Core Parameters for MAX 10 Devices
UG-M10MEMORY
2015.05.04
Altera Corporation ROM: 1-PORT IP Core References
Send Feedback