Altera MAX 10 Embedded Memory User Manual
Page 41
Option
Legal Values
Description
Byte Enable Ports Create byte enable for
port A
On/Off
Specifies whether to create a
byte enable for Port A and B.
Turn on these options if you
want to mask the input data
so that only specific bytes,
nibbles, or bits of data are
written.
Parameter Settings: Regs/Clkens/Aclrs
Which ports
should be
registered?
When you select With
one read port and one
write port, the
following options are
available:
• Write input ports
‘data_a’,
‘wraddress_a’, and
‘wren_a’
• Read input ports
'rdaddress' and
'rden'
• Read output port(s)
‘q_a’ and 'q_b'
When you select With
two read/write ports,
the following options
are available:
• Write input ports
‘data_a’,
‘wraddress_a’, and
‘wren_a’ write
input ports
• Read output port(s)
‘q’_a and ‘q_b’
On/Off
Specifies whether to register
the read or write input and
output ports.
More Option
When you select With
one read port and one
write port, the
following options are
available:
• ‘q_b’ port
When you select With
two read/write ports,
the following options
are available:
• ‘q_a’ port
• ‘q_b’ port
On/Off
The read and write input
ports are turned on by
default. You only need to
specify whether to register
the Q output ports.
UG-M10MEMORY
2015.05.04
RAM: 2-Port IP Core Parameters for MAX 10 Devices
5-13
RAM: 2-PORT IP Core References
Altera Corporation