Pitney Bowes DM475 - Manual (Page 61)

4-5
4 • Printing Options
SV62261 Rev. F
Sealing Envelopes without Printing a Meter Stamp
DM300c
You can use your DM300c as an envelope sealer to seal pre-
addressed envelopes without printing a meter stamp.
1. Press
Menu .
2. Select "Printing Options."
3. Select "No Printing (Seal Only)."
4. Place flap along moistener and
move towards the right.
5. Slide the envelope to the right
until the sys tem takes hold of it.
The system seals and ejects the
piece.
6. Select “Return to Normal Mode”
when finished to return you to the
Home screen.
DM400c/DM475
You can set up your mailing system to seal envelopes with out
printing a digital indicia on them.
1. Make sure the seal/no seal lever is set to the seal position (see
Chapter 2 - Getting to Know Your System ).
1. Press Menu .
2. Select "Printing Options."
3. Select "No Printing (Seal Only)."
4. Load unsealed envelopes onto the feeder and press Start.