Appendix a • specifications – Pitney Bowes DM475 User Manual
Page 210
A-4
Appendix A • Specifications
SV62261 Rev. F
Material Specifications
i
NOTE:
For a proper seal, the envelope’s minimum flap angle
must meet the following criteria:
•
For envelopes with a flap length from 25 to 60mm (1 to 2.36
inches), the minimum flap angle is 18 degrees.
•
For envelopes with a flap length greater than 60mm to the
maximum flap length for the particular model, the minimum
flap angle is 21 degrees.